X32 Boeing Composite and VTOL printed Build (2024)

Aug 22, 2023, 01:57 PM

• #1

Joel_Vlashof

Thread OP

Build Log

Hi all, Together with my friends from Rc Jet print we're working on the Boeing x32, time to post some progress.

goal: Vtol model large size printed and composite

here are some progress videos and designs sofar

Boeing X-32 JSF composite 105mm

Last edited by Joel_Vlashof; Aug 23, 2023 at 12:24 AM.

Aug 22, 2023, 01:58 PM

• #2

Joel_Vlashof

Thread OP

https://www.youtube.com/shorts/9jpr_cA9aNk

Aug 22, 2023, 02:07 PM

• #3

Joel_Vlashof

Thread OP

our idea is to go for a twin 70mm in the first place from JP Europe, good for 6KG of output. the lift system will be balanced by 4x 40mm, yaw momentum in the wings stabilized by an kk2,1 for now in tricopter setup.

let me know if you want us to post more about the x32. it flies allready awesome. in september i will jump back into the F-35 concentrating on transitions. for now i balance my life dure a close burnout. it was too much too handle so i took a step back, do sports and enjoy my familiy...and a nice flight with the x32..super proud!!!

warm regards Joel

Aug 23, 2023, 12:32 AM

• #4

Joel_Vlashof

Thread OP

Last edited by Joel_Vlashof; Aug 23, 2023 at 02:20 AM.

Aug 23, 2023, 12:34 AM

• #5

Joel_Vlashof

Thread OP

Aug 23, 2023, 02:17 AM

• #6

Joel_Vlashof

Thread OP

Aug 23, 2023, 02:18 AM

• #7

Joel_Vlashof

Thread OP

Sep 10, 2023, 05:55 PM

• #8

dhouston1125

So who actually runs this site and which aircraft is associated with which person? Joel or the other guy ?

I have received emails pointing fingers at the other guy as an excuse to not provide support. However both seem to use the greeting g ‘hey mate’

So who is who and why are they pitching g something g new when the old stuff e.g., harrier and F35 do not even work, I.e., transition vtol with full components.

Sep 11, 2023, 07:09 AM

• #9

Joel_Vlashof

Thread OP

hi David, ( dhouston) this is my private "non commercial" hobby composite X32 build. so please keep it to this topic unless you have some great input, questions or ideas i am happy to listen and share ideas with you, that is where RC-groups is for!!
if you are unhappy about your rcjetprint harrier please contact Rene Rosentreager and visit his youtube or contact page!

for questions about the F-35B printeble or composite f35 version or X32 project in this case, you can ask me or Eric all about it.

let me know

best regards,

Joel

Sep 11, 2023, 06:14 PM

• #10

dhouston1125

Please answer the above questions and fix the harrier.

Otherwise, I suggest you put a warning on your RC jet print website

Last edited by dhouston1125; Sep 12, 2023 at 05:59 AM.

Sep 12, 2023, 02:52 AM

• #11

Joel_Vlashof

Thread OP

Hi David, I don't own Rc-Jetprint.com and My minifactory.com, these are platforms where you can upload 3D files. On my minifactory.com there are many users and i am not responseble for other users what they are uploading. (in your case Rene owner on the Harrier on rc jetprint) so i am not the person you are looking for. it's true i helped Rene with setting up his KK2.1 board, because i am good at this. he ask me for help, so i did. i truely believe if we hekp each other, promote each other we all get better and better, but men you dont give any change for that. please start your own tread about your harrier build it and we can all reply on that

I like Rc jetprint because i like Printed Jets. My minfactory.com is more for3D printeble RC cars for example. https://www.myminifactory.com/search/?query=rc%20car
You are attacking me and given me a bad name for a long time now, and i would like you to stop at this point.
I would love to help you with your harrier, for that i need to download the sea harrier first and build it. if that is satisfying you?

Let me know.
Best regards Joel

Last edited by Joel_Vlashof; Sep 12, 2023 at 03:23 AM.

Sep 12, 2023, 03:21 AM

• #12

Joel_Vlashof

Thread OP

Sep 12, 2023, 06:06 AM

• #13

dhouston1125

Does not seem to be an accurate statement. See:

The RC-Jetprint (Andreas Siek) in cooperation with the VJM-Aviation (www.vjmaviation.com - owner: Joel Vlashof) develop and test unique model airplanes to make these models available for every ambitious modeler.

The project progress, as well as build tutorials can be followed and experienced "live" on the relevant social media platforms, such as Youtube and Instagram.

Become part of e.g. a unique vertical takeoff project, like the Sea-Harrier, the F-35B with capabilities like VTOL (Vertical Takeoff and Landing) or STOL (Short Takeoff and Landing) or a Su-47 (Su-X) optimized for RC model flight with vector control.

http://rc-jetprint.de/en/

In any event, it seems you should be more clear in your sales pitch.

this gentlemen can't get it to fly and he is thinking of "binning" the whole project after spending who knows how much on printing and components....

Last edited by dhouston1125; Sep 12, 2023 at 07:43 AM.

Sep 12, 2023, 08:09 AM

• #14

Joel_Vlashof

Thread OP

My coorperation with rc jetprint is for the f35 and Donier model, like i did with my av8b model on myminifactory. the sea harrier is a cooperation between Rene and Rc jetprint. That being said, if you read all the comments in his video, i wrote a comment that he can write me an email to get in contact with me personally. i offered him a video call so i can help him to setup his kk2 board, but he never wrote me a email to get in touch with me..so back to your question..what do you or RChelichekuk want more from me from a project i dont own!!! i all list of components on the website you will find the project owners, you dont see my name on the sea harrier.

this is what i got from this nice gentlemen, i allready treid to help him but no webstie or ways to contact him.

@rchelichekuk6655
2 weken geleden
Boy am I happy to be having a comment from you Joel! I have had it on grass and it lifts a lot quicker but like you say it’s the tuning of the KK2 I’m having issues with. I have no clue what I am doing my friend so I would be extremely grateful of any help with settings and numbers because I know you successfully setup and hovered Renè’s Harrier

So David, can we move on with the Boeing X32? do like the idea of 2x70mm setup or should a single motor works fine?

Last edited by Joel_Vlashof; Sep 12, 2023 at 08:15 AM.

Sep 12, 2023, 09:18 AM

• #15

Joel_Vlashof

Thread OP